Spikes (L)

Item No.: 000500

1,01 EUR - 1,19 EUR
incl. 19 % VAT

Scaled Prices

Quantity Unit Price
1-99 1,19 EUR
100-199 -0,06 EUR 1,13 EUR
>= 200 -0,18 EUR 1,01 EUR
 
  • Size: L

  • Variant: Spikes


piece(s)

There are no reviews for this product yet.

product description

Spikes — Tungsten Carbide Pins for Alternative Hoof Protection with Plastic Coating

Everyone knows about tungsten carbide pins as an add-on for additional anti-slip protection for horseshoes — but what if the horseshoe is not made of steel or aluminum, but is an alternative hoof protection with plastic coating?

The answer is quite simple: What the carbide pin is for the steel shoe, the screw-in spikes are for the plastic hoof protection — regardless of whether it is a hoof boot, a pure plastic shoe or a composite shoe like ours.

Screw-in studs, like tungsten carbide pins, are intended as a preliminary step to studs — that's probably why many of our customers also call them quick studs. These quick studs offer a certain additional slip protection. However, compared to studs, they have the advantage of a reduced risk of injury and less stress on the horse's leg.

For additional grip, we usually use two quick studs in the heel area of the shoe. For an "ordinary" leisure or endurance rider, this simple measure is often sufficient as an additional anti-slide protection. Of course, you can't say that as a general rule.

Riding in winter with alternative hoof protection and quick studs

Quick Studs as Additional Anti-Slide Protection — Photos

Quick Studs, also known as Spikes — comparable to tungsten carbide pins in combination with a hoof protection with plastic coating

The quick studs — also known as spikes — are similar to the carbide pins of the traditional steel shoe. You may buy quick studs in two different sizes for additional anti-slide protection.

Quick Stud Application Tool — for an easy application of the spikes into the synthetic material of the composite horseshoe

For the application of quick studs, you need a quick stud application tool. Please note that this adapter is available in two sizes.

applying a quick stud into a plastic horseshoe with solid metal inlay

When screwing in the quick studs, make sure they are in the correct position so that no undesirable pressure is exerted on the hoof.

side view of a quick stud to add additional grip to your composite horseshoe

Even if the spikes, as a preliminary stage to studs, only minimally protrude above the synthetic cover of the horseshoe, they increase the risk of injury in a herd situation.

subsequent application of the quick studs to a composite horsehoe which has already been nailed to the horse's hoof

With most horses, the quick studs can even be screwed in afterwards — that is, when the shoe has already been nailed or glued to the horse's hoof.

ridden horse in winter with plastic shoe with stabilizing metal core and quick studs for more grip

Even with quick studs as an additional anti-slip protection, you must always adapt your riding style and speed to the surface and climatic conditions to avoid injuries.

Application and Safety Instructions when using Quick Studs (Spikes) for Extra Grip - VIDEO

In general, the application of the quick studs is simple and quickly done with a little technical skill. Depending on the horse's behavior, it is in principle even possible to subsequently install the spikes.

For all work, observe our currently valid Security Advices for working with our products as well as with the tools used. Even though the additional risk of injuries in a herd situation when using spikes is usually many times lower than with studs, you must remember to think about this when equipping a horseshoe with spikes.

Quick Stud Application Tool — also known as spike adapter — in different sizes

The Difference between M Spikes and L Spikes

The slightly larger L spikes are not suitable for use in the toe area of our STS horseshoes and neither for the pony sizes of our "Classic" model.

Otherwise, you can decide for yourself whether you want to use the M or L spikes for additional grip. Please make sure to also use the appropriate quick stud application adapter.

Even if the M spike fits into the L adapter in principle — the devil is in the details because the M spike has a less stable fit in the L adapter. This small instability can cause difficulties when screwing in the spike.

The Correct Position of the Spikes

In principle, the spikes can be placed wherever there is no metal core. However, they should be mounted in the area of the bearing edge of the hoof wall and not too close to the edge of the shoe.

The exact positioning and the number of spikes used is at the discretion of the farrier on site. In general, the options differ depending on the model of the horseshoe. Make sure that the quick studs are installed in the area of the bearing edge of the hoof wall. Otherwise, there could be pressure on sensitive areas of the hoof.

Depending on the model version, our newer horseshoes already have small flat dimples which are meant for the application of spikes. Please do not confuse these flat dimples with the production-related deeper holes of the earlier model versions, in which the small spikes would literally disappear.

If you have a horseshoe without the small dimples for the spikes application or if you would like to position them in a different place, we advise you to use a marker and a wood drill bit to prepare such a dimple yourself.

various composite horseshoes to explain the correct position of quick studs for additional grip

Quick Stud Application

  • Preparation of a flat dimple (if it is already prefabricated, this step is not necessary):
    • Mark the desired location of the quick stud on the horseshoe.
    • Use your wood drill bit to drill a flat dimple (about 1 or 2mm) into the synthetic material at the marked positions.
    • When placed in this dimple, the quick stud won't slide away so easily when screwed in.
    • Deeper predrilling is counterproductive; otherwise the quick stud would no longer have a secure hold in the plastic sheath.
  • Then place the quick stud on the matching adapter (M/L). The two pegs of the adapter must fully fill the two grooves of the quick stud to ensure that the stud has a secure fit.
  • After that, you place the tip of the quick stud in the center of the dimple.
  • Slowly and vertically screw the quick stud into the synthetic sheath with moderate pressure and at slow speed. You can stabilize the adapter with the other hand.

The correct fit of the quick studs in the synthetic sheath of the horseshoe:

  • The quick stud fits perfectly and provides additional grip when only the small hard metal head overtops the surface of the horseshoe.

What to avoid when applying quick studs:

  • If the quick stud isn't screwed in enough, it will easily get lost and also represents a risk of injury for both human and horse.
  • If the quick stud is screwed in too far, it can't provide additional grip. In addition, its tip might break through the hoof side of the horseshoe.
  • If the quick stud is too close to the edge of the horseshoe, the plastic may tear out. Therefore, make sure that the distance between the quick stud and the edge of the horseshoe is large enough.
  • In order to ensure durability, the quick stud should not be overwound.
spikes as a preliminary stage to studs when using alternative horseshoes with a plastic sheath
incorrectly applied  spikes as a pre-stage to studs in the plastic fitting
a spike which has been screwed in too deeply as a pre-stage to studs in the plastic horseshoe

Product Features

Article spikes, quick studs, small studs for additional grip
Article Number Spikes 000500 (L), 000502 (M)
Spike Adapter 041000 (L), 041001 (M)
Made in Italy
Function anti-slip protection, anti-slide protection, anti-skid protection, additional grip
Riding Styles and Disciplines among others: leisure riding, cross-country, trail riding
Thread Size M and L
Matching Alternative Horsehoes In principle, the quick studs can be combined with all composite and pure plastic horseshoes.
Usage At your own discretion; adapted to ground conditions, riding discipline and safety in a herd situation.
Application With a cordless screwdriver and quick stud application tool — also known as spike adapter — of the appropriate size.
Risk of Injuries in Herds The use of quick studs can increase the risk of injuries in a herd situation.
We cannot be held liable for any damage that may occur.
Please read and follow our safety instructions.
Safety Information can be found under FAQ → Safety Information
Packaging Unit sold in pieces
Quantity Discount Spikes: from 100 pieces per size (article no.)
Spike Adapter: from 10 pieces per size (article no.)
Exchange and Return Possible under certain preconditions within 3 months within the EU.
For returns from outside the EU please contact the Customer Service Team.
For further details please look at FAQ → Service & Conditions.
Shipment worldwide; deliveries to France, Switzerland and Canada are carried out by our our country representatives

Tipps & Tricks

At this point, we would like to use this opportunity to give you some additional information that we find helpful in everyday life.
If you would like to contribute something yourself, you are welcome to leave us a review and tell others about your experience.

Quick Stud inside a Quick Stud Application Tool and a Hot Air Gun

Quick Studs as an Additional Protection against Abrasion

In the first place, of course, quick studs provide additional grip and thus serve as anti-slip protection. In addition, they also contribute to the durability of the horsehoe because they act as an additional abrasion protection.

Facilitated Application through Heating

Especially (but not only) in winter, at lower temperatures, the application of quick studs can be a challenge. The solution is very simple: The quick studs can be effortlessly screwed into the plastic sheath if you heat their tip slightly beforehand.

Reviews

* Only reviews that were submitted by buyers who have bought the product in this shop receive the addition "Verified Purchase".

On May 28, 2022, the Omnibus direcitve (Directive EU 2019/2161) has altered the law against unfair competition. Among other changes, new duties to supply information about the authenticity of customer reviews have been introduced. Starting on May 28, 2022, companies that advertise with reviews must inform whether they use testing mechanisms for the authentification of their reviews. If yes, the companies must also explain which testing mechanisms they use.

In this shop, only verified buyers can publish reviews. That means that the system checks whether the client has actually bought the product. Reviews without a client account or without logging in are not possible. Reviews of verified purchases are flagged as Verified Purchase.

Some reviews were collected as part of a sweepstakes. The same guidelines apply in this case too: Only registered customers can submit reviews on verified purchases. All reviews submitted, regardless of feedback, were included in the prize draw. In this way, we ensure that the authenticity of the reviews is also guaranteed in this context.