Adjustments and Modifications - Step by Step to a Customized Horseshoe
At this point, we would like to provide you with a brief overview of how you can optimally adjust our horseshoes to fit the hoof. Of course, this also includes possible modifications such as removing the quarter clips or grinding a deeper tread pattern.
Most of the information on this page applies to both our composite horseshoes and the pure plastic models.
![coffin bone and composite horseshoe](../media/images/org/anpassungQuerschnitt.png)
With its metal inlay, the composite horseshoe offers protection and support for the coffin bone and, at the same time, flexibility and shock absorption for the inner soft tissue structure, tendons and ligaments.
With four different shapes (round / oval / STS / open-toed) and sizes in 4mm steps (8mm steps from size 182mm on), there is a perfect horseshoe available for (almost) every horse.
However, in order for the hoof to optimally benefit from the functionality of the horseshoe and to make sure the horseshoe doesn't get lost during the regular shoeing period, it is necessary to adjust the horseshoe to the hoof shape before shoeing.
Take a look at our "Accessories" category if the modifications presented here are not sufficient and the horseshoe simply won't fit properly. In cases where you need to widen the shoe laterally or extend it backward, we recommend our extensions. Additionally, modifying an open sole area into a closed one is possible. For further details, refer to our Accessories section, where we also offer wedges for adjusting the hoof angle.
Choosing Model, Shape, and Size
First, select the horseshoe that best suits your needs. Depending on whether you're planning a long trail ride with your horse or participating in eventing tournaments, you'll naturally have different requirements for the ideal horseshoe. If you're unsure which composite horseshoe is best for your horse and your discipline, feel free to reach out — we're happy to assist you.
Choosing the Right Shape
Usually, you need round horseshoes for the front hooves and oval ones for the hind hooves.
But, as always, there are exceptions.
The decision for or against an STS model, however, isn't only based on the hoof shape but
also on the locomotor mechanics of the horse. With the straighter toe area, you can
position the horseshoe slightly towards the heels and facilitate breakover.
![round and oval hoof - pre-cut, ready for shoeing](../media/images/org/anpassungHufform.png)
Choosing the Right Size
The horseshoe size indicated always tells the width of the horseshoe in millimeters.
Currently, our horseshoes are available from 50mm to 198mm depending on the model. The
smallest sizes are only available as pony shoes without a metal core; the largest horseshoes
are from our Heavy Duty range, which is designed for breeds such as draft horses.
In order to determine the right size for your horse, use a measuring tape or a ruler to
measure the widest part of the newly trimmed hoof's bottom side - usually, it can be found
at a short distance behind the frog apex.
![Oval hoof - pre-cut, ready for shoeing, with matching horseshoe; an arrow marks the widest point of the hoof and the shoe](../media/images/org/anpassungOvalENG.jpg)
The marking indicates the widest point of the hind hoof and the oval horseshoe.
Special Case: Composite Horseshoes with Threaded Holes for Studs
When choosing the correct shape and size of a horseshoe with stud holes, attention must
always be paid to the position of the threaded inserts.
If the stud holes are placed too far in the back, the horseshoe won't fit perfectly and
the risk of losing it increases. In general, a wrong position of the thread inserts does not
only increase the risk of losing the horseshoe but also the risk that the studs cause
indesirable pressure on sensitive areas of the hoof which can cause bruising or soreness.
The correct position for thread inserts is in the heel area.
![Illustration of the correct position for stud holes in the heel area of the hoof](../media/images/org/anpassungRundGewindeENG.jpg)
The marking shows the position of the stud holes on the hoof.
Special Case: Removal of Quarter Clips
Most of our composite horseshoes have quarter clips that you can easily remove as needed.
You can use your standard angle grinder. We recommend removing the clips
piece by piece and in turns because of the heat that develops and causes the synthetic
material to melt. Take into account the safety risk due to potential sparks. Try to preserve
as many knobs as possible! You can also partly remove the metal on the bottom side of the
horseshoe if you'd like to round the shoe off.
If you plan to use the horseshoe as an adhesive shoe, please note that you will not achieve
a plastic weld in the area of the removed quarter clips.
![a farrier removes the side caps of the horseshoe](../media/images/org/anpassung-hufeisen-seitenkappen-entfernen.jpg)
Grinding the quarter clips of the horseshoe.
Customizing the Horseshoe to the Individual Shape of the Horse's Hoof
We have noticed that our horseshoes are often chosen solely based on their width, and users do not consider necessary adaptations or modifications, especially in the heel area. That may work out in many cases. However, if a horseshoe isn't properly shaped to the hoof, the risk of loss and injuries increases — not only for your own horse but for the complete herd! The nails and possible quarter clips of a lost horseshoe (never mind whether it's a composite horseshoe or a conventional steel shoe) can cause severe injuries. In addition, a lost horseshoe can always take a part of the hoof wall with it.
Thus, we would like to address the precise adaptation of the shoe to the horse's hoof at this point, including all optional modifications as well as small tips and tricks that can be implemented without additional accessories.
Adjust the Horseshoe to the Hoof
Even if the selected shoe size seems to fit well at first glance, it is still necessary to adapt the shoe optimally to the individual hoof; this applies equally to pure plastic shoes as well as composite horseshoes.
The individual customization of the horseshoe is always at the discretion of the on-site
farrier.
We recommend always taking a careful look at the overall fit of the horseshoe and adjusting
the horseshoe, where necessary, to the shape of the hoof using an angle or belt grinder.
Following this, additional adjustments and optional modifications can be made.
![a composite horseshoe and the possibilities of adapting it to the hoof shape](../media/images/org/anpassungGrenzen.png)
The graphic shows to which extent you can usually modify the composite horseshoe without affecting its functionality. However, there are exceptions to this as well.
![adapting a composite horseshoe to the shape of the front hoof](../media/images/org/anpassungRundStiftENG.jpg)
Marking the hoof shape on the horseshoe.
![adapting a composite horseshoe to the shape of the front hoof.](../media/images/org/anpassungRundFlexENG.jpg)
Customized horseshoe.
Check and Adjust the Position of the Knob Arrays
Except for the open-toed horseshoes and the pony shoes, all our horseshoes feature
integrated knob arrays. The 'Nailless' and the pure plastic model 'Classic' have soft,
production-induced knobs, while the remaining horseshoes feature a colored knob array inlay.
In case of sensitive horses with irregularly shaped or very flat hooves, we recommend
removing the inner knobs so they won't exert pressure on the sole. If you intend to glue on
the horseshoe, we generally advise removing all knobs. If you intend to use the
horseshoe as a wedge shoe, you will find additional information regarding the knobs in the
product description of the wedges.
![Horseshoe after the knobs have been removed.](../media/images/org/anpassung-hufeisen-noppen.jpg)
Horseshoe after the knobs have been removed.
Adjust the Debris Guard
(Optional Modification)
Most of our horseshoes have a molded synthetic rim, also known as debris guard, which
considerably reduces the accumulation of snow, sand, and debris.
Some horses have very flat hooves and are extremely sensitive, so adjusting the debris guard
may be necessary. In this case, we recommend trying to grind the guard thinner instead
of completely cutting it out, so that its basic function can be preserved.
![Modify the debris guard of the horseshoe.](../media/images/org/anpassung-hufeisen-kunststofflippe.jpg)
Modifying the debris guard of the horseshoe.
Shaping a Horseshoe More or Less Wide
(Optional Modification)
You can also change the width of the horseshoe at your own discretion. In order to make it
wider, you put it either
on a small parallel vise with a narrow or narrow-ground jaw or – if the horseshoe is small
enough – on a pair of pincers.
You can make a large horseshoe less wide with your hammer. Be careful not to twist the metal
core! If necessary, you can straighten the metal core with some well-directed hammer blows.
![A farrier presents a narrowly forged composite horseshoe.](../media/images/org/anpassung-hufeisen-enger.jpg)
Original horseshoe and modified, narrower version.
![A farrier presents a wider shaped composite horseshoe.](../media/images/org/anpassung-hufeisen-weiter.jpg)
Original horseshoe and modified, wider version.
Horseshoe with Deeper Tread Pattern
(Optional Modification)
Use your angle grinder with a coarse-grained grinding disk to make a profiled horseshoe from
a regular version without deeper tread pattern. Make sure the ground-off synthetic material
doesn't clog the nail holes.
For the Straight Bar horseshoes, we advise against grinding a profile afterward.
![a farrier grinds a profile into the plastic coating of the composite horseshoe using an angle grinder](../media/images/org/anpassung-hufeisen-profil.jpg)
Grinding a deeper tread pattern into the plastic coating of the composite shoe.
Toe Rocker — Early Breakover
(Optional Modification)
There are different ways of creating a toe rocker on a composite horseshoe. For example, you
can treat the shoe with your angle grinder.
Another option, although not commonly utilized, is to modify the toe rocker by bending it.
Fixate the horseshoe at the edge of the anvil or in a parallel vise and reshape it with your
hammer.
If you want to position the horseshoe a little further backwards to achieve an earlier
breakover point, our STS shoes could be a possible alternative for you. The STS models are
available in a round shape with a straight toe and already have a certain rocked toe.
![a farrier modifies a horseshoe using a belt sander to add a toe rocker](../media/images/org/anpassung-hufeisen-zehenrichtung.jpg)
Modifying the horseshoe with the belt grinder.
Modifying the Synthetic Bar
(Optional Modification)
Basically, the bar's purpose is to maintain the frog's health by providing it with constant
ground contact. With a healthy, functional frog, we recommend not removing the synthetic bar
from the
horseshoe. The situation is different, for example, in case of thrush: Some farriers raise
concerns over shoeing thrush horses with composite shoes because they are closed over the
frog and
don't let fresh air circulate in the problematic area.
In particular in case of thrush it can be helpful, to modify the horseshoe in such a way
that there is a free space at the central groove and the posterior part of the collateral
grooves so you can medicate them correctly.
The extent of the modification in the frog area should be based on the severity of the
condition of the frog.
If, for example, in the case of thrush, there is already no contact between frog and the
ground even without a
horseshoe due to the severity of the thrush, it is advisable to completely remove the
plastic bar so that the frog can be regularly treated. Generally, it is possible to remove
the bar without affecting the stability of the composite horseshoe. If there is a deep
central sulcus but the frog still maintains ground contact overall, we often like to cut a
small triangle out of the bar. This allows the owner to regularly maintain the horse's frog.
![Horseshoe that has been modified above the central groove.](../media/images/org/anpassung-hufeisen-strahlfreiheit.jpg)
Horseshoe that has been modified above the central groove.
![ein im Strahlbereich modifiziertes Verbundhufeisen](../media/images/org/anpassung-hufeisen-steg-entfernen.jpg)
Removing the plastic bar of the composite shoe.
Adding a Bevel
After having shaped the horseshoe, it's time for the finishing touches: adding a bevel to the
upper and lower border of the horseshoe.
With a bevel on the hoof side as well as on the bottom side, the horseshoes will glide off
each other more easily if the horse steps on the front shoes with its hind hooves.
![illustration of a bevel on the plastic coating of the horseshoe that is already nailed on the hoof](../media/images/org/anpassungFase.jpg)
Bevel on the upper and lower border of the shoe.
Adding an Additional Protection against Forging
(Optional Modification)
If your horse makes large steps with its hind legs and is (despite all adjustments) prone to
forging, you can add an additional protection against forging on the bottom side of the
horseshoe. Thanks to the additional incision in the heel area, the shoe gives way more
easily and it is less likely for the horse to pull the shoe off.
In case of a Straight Bar horseshoe with a stable crossbar, this modification is not
possible.
![Adding an additional protection against forging to the horseshoe.](../media/images/org/anpassungAbtrittschutz1.jpg)
Adding an additional protection against forging.
![additional protection against forging](../media/images/org/anpassungAbtrittschutz2.jpg)
Protection against forging.
Shoeing Composite and Pure Plastic Horseshoes — Further Information
![a farrier holds a composite horseshoe against the hoof to check the fit](../media/images/org/produktempfehlungAnwendung.jpg)
Above all, the question arises about the right model. In our range, you will find many different composite horseshoes with various additional features as well as pure plastic shoes.
![a farrier tests if a clipped horseshoe fits the hoof properly](../media/images/org/produktempfehlungGroessenbestimmung.jpg)
The first step is to find the right size and shape for each horse's hoof. On the 'Sizes and Shapes' page, you'll find a template as well as a table with the measurements of our horseshoes.
![A farrier nails a composite horseshoe onto a hoof](../media/images/org/produktempfehlungBeschlagsanleitung.jpg)
The composite shoes can be applied either by nailing or gluing them to the hoof. They can also be used as cast shoes. There is a shoeing instruction available for all three of them.
![ein Pferd das mit Verbundhufeisen beschlagen ist, geht im Schritt über Steine in Arizona](../media/images/org/produktempfehlungHaltbarkeit.jpg)
The durability of the composite shoe is influenced by many factors. We have summarized the most important information regarding wear and longevity for you.
Latest Update: 2024-02-01