product description
Studs for Nordic Countries
One major advantage of producing our studs, as well as our horseshoes, in our own facility in the Bavarian Forest is that we can respond to customer feedback. Of course, it’s not possible to fulfill every request, but when we see a growing demand for a specific product, we will do our best to include it in our range.
This is precisely the background behind these new studs. They are our response to customer feedback that we’ve received from Iceland, among other places. Particularly in Iceland and other Nordic countries, horseshoes need to be equipped with higher studs during the winter. A dangerous combination of ice and snow makes riding in the Nordic countries a risky endeavor and we understand that our 4mm and 6mm studs provide insufficient grip for horses in these regions.
Until now, the only option was to equip our Jumper or HDS Traction with higher studs. However, a sturdy straight bar shoe is not always the right choice for the horse. For this reason, the new 'Nordic' stud with a disk has been developed specifically for these regions.
The Right Ground Conditions
The 'Nordic' stud with disk is approximately 10mm high and designed for use in our horseshoes with stud holes that are fixated in the plastic coating, provided the stud can sink completely into the ground at all times. Therefore, attention must be paid to suitable ground conditions in the field, paddock, and stable.
If the stud cannot fully sink into the ground, it may compromise the stability of the horseshoe and the horse’s health in the long term.
Permanent Stud Application
Composite Horseshoes that can be equipped with the 'Nordic' studs are not designed for regular stud changes. That means that you cannot screw the studs in and out multiple times. Of course, you can protect the stud hole with a blank stud until winter sets in and insert the studs only when the ground conditions are appropriate. The same applies at the end of winter. However, it is not possible to screw in the 'Nordic' studs only as needed, as frequent screwing in and out can compromise the stability of the thread inserts in the plastic coating of the horseshoe.
'Nordic' Studs for Better Grip on Ice and Snow
The 'Nordic'studs with disk were developed for our horseshoes with stud holes in the plastic coating. The approximately 2mm-high disk helps to distribute the pressure more evenly across the hoof.
For using the M8 'Nordic' studs, you can choose between the standard clipped and threaded horseshow, or the 'Snow-Edition'.
The stud hole in the horseshoe should always be protected from dirt. Metal or plastic closing plugs can act as blank studs until the 'Nordic' studs are installed.
Application and Safety Guidelines for Using the 'Nordic' Studs – Video
The use of studs increases the risk of injury within a herd and for the horse itself. The responsibility for the use of studs and their monitoring during application lies with the farrier and the horse owner.
Several Safety Aspects Must be Considered when Using Studs:
- Studs increase the risk of injuries in the herd. Always coordinate the use of studs, especially cone-shaped studs like the 'Nordic' studs, with the stable owner and other horse owners.
- The horseshoe must be perfectly adjusted to the hoof to ensure that the stud is in the right position below the hoof.
- Note that the 'Nordic' studs are not suitable for use on hard surfaces. They must be able to fully sink into the ground at all times.
- Regularly check the horseshoe, quarter clips, and the positioning of the studs during the shoeing period. A tilted stud indicates that the threaded insert in the plastic coating is no longer properly aligned.
Stud Installation on Composite Horseshoes
Installing the 'Nordic' Studs in Composite Horseshoes
We encourage you to watch the video on the application of our anti-skid studs with disk, as the process is identical for both the anti-skid studs and the 'Nordic' studs.
If you decide to use studs for additional grip, please read and follow our safety guidelines to prevent injuries. Additional information on the use of studs for a better grip can also be found in the respective product descriptions.
Product Specifications
| Model | "Nordic" Studs with Flange |
|---|---|
| Brand | Not specified |
| Item Number | M8: 001340 |
| Produced in | Germany |
| Function | Screw-in studs, additional grip, winter shoeing, extra anti-slip protection – designed for Nordic regions |
| Riding Styles and Disciplines | The 'Nordic' stud is designed for added grip in wintry conditions and suitable ground surfaces. The combination of 'Nordic' studs and horseshoes with stud holes in a plastic coating is not suitable for extreme activities like eventing, hunting, show jumping, or driving. |
| Stud Thread | Not self-tapping |
| Stud Replacement | Not suitable |
| Blind Studs |
Closure plugs can be used as placeholders until the permanent application
of the 'Nordic' studs. The plugs keep the threads clean, ensuring the threaded insert remains stable and making it easier to screw in the stud later. If dirt continually enters the thread hole, it can exert unwanted pressure on the hoof. |
| Stud Height | Approx. 10mm (including disk) – only suitable for appropriate ground conditions |
| Thread Size | M8 |
| Compatible Composite Shoes |
Clippd and Threaded (M8) Horseshoes; Snow-Edition |
| Application | At your discretion, adapted to ground conditions, riding discipline, and herd safety |
| Risk of Injury |
Using cone-shaped studs increases the risk of injury. We do not assume liability for any
damages that may occur. Please read and follow our safety guidelines. |
| Safety Guidelines |
Available under FAQ → Safety Guidelines Using studs on hard surfaces can impact the horse's health and the stability of the horseshoe. While the 'Nordic' stud provides some grip, riding on ice and snow always carries risks. Injuries can also occur within a herd. Regardless of how well a horseshoe is equipped, slipping can still happen. Always maintain a safe speed. |
| Packaging Unit | in pieces |
| Quantity Discount | Available for orders of 100 pieces or more per item |
| Returns and Exchanges |
Possible under certain conditions within 3 months within the EU. For returns outside the EU, please contact our Customer Service Team. Full details are available under FAQ → Service & Terms. |
| Shipment | Shipment is generally available worldwide; however, in regions like our home market in Germany, these studs may not be a good choice due to unsuitable ground conditions for their use. |
What Makes Our Studs Special?
Naturally, there are many different hoof studs available on the market.
So, what sets our
'Nordic' studs apart, and why are our studs with disk the best fit for our alternative horseshoes?
As with our horseshoes, we prioritize quality 'Made in Germany' in our studs. For enhanced durability, our studs are hardened, and the integrated tungsten carbide pin ensures that the stud wears less quickly, even on hard ice.
The most important feature of our 'Nordic' studs is their disk.
The disk helps distribute the pressure more evenly, benefiting both the sensitive horse hoof
and the stability of the threaded insert in the plastic coating.
This might also be of interest to you:
Reviews
That means that the system checks whether the client has actually bought the product. Reviews without a client account or without logging in are not possible. Reviews of verified purchases are flagged as Verified Purchase.
Some reviews were collected as part of a sweepstakes. The same guidelines apply in this case too: Only registered customers can submit reviews on verified purchases. All reviews submitted, regardless of feedback, were included in the prize draw. In this way, we ensure that the authenticity of the reviews is also guaranteed in this context.
Manufacturer in accordance with the Regulation (EU) 2023/988 on General Product Safety (GPSR)
Manufacturer in accordance with the Regulation (EU) 2023/988 on General Product Safety (GPSR)
Name: H. Frank Kunststofftechnik GmbHElectronic Address: info@duplo-frank.de
Physical Address: Vorderfreundorfer Straße 20
ZIP Code: DE-94143
City: Grainet
Country: Deutschland
Phone: +49 (0)8585/96926-0
Responsible Person in accordance with the Regulation (EU) 2023/988 on General Product Safety (GPSR)
Name: H. Frank Kunststofftechnik GmbHElectronic Address: info@duplo-frank.de
Physical Address: Vorderfreundorfer Straße 20
ZIP Code: DE-94143
City: Grainet
Country: Deutschland
Phone: +49 (0)8585/96926-0